Output:
Voltage, RMS 45 Volts 20Hz to 20 kHz
Voltage, Peak-to-Peak 127.3 Volts
Power 250 Watts per channel into 8 Ohms (24dBW)
400 Watts per channel into 4 Ohms
Current peak-to-peak 75 Amps
Damping Factor 170
Output devices per channel 4
Pre-out impedance 50 Ohms
Line input:
THD + N, 20Hz to 20 kHz <0.01% typical
Signal / noise ratio >100dB 'A'-weighted
Input sensitivity for 250W 330mV
Input impedance 38K Ohms
Overload Margin 30dB
Channel Separation >70dB typical
Frequency response 20Hz to 20 kHz, +0, -0.1dB
Phono input response RIAA/IEC combined
Signal / noise ratio >96dB 'A'-weighted
Input sensitivity 2.5mV (Moving Magnet)
Input impedance 47K Ohms
Overload margin 30dB
Connections:
Line level inputs 4 pairs line level RCA connectors
1 pair phono (MM) RCA connectors
Line level outputs 1 pair RCA [preamp] controlled by the volume
1 pair RCA [ tape record] fixed line level
Digital inputs 1 USB 1.1 [32, 44.1, 48 kHz sample rates] connection
for computer only
Remote input 1 3.5mm (mono) jack socket >3V pk-pk 38KHz modulated
or unmodulated
Speaker outputs 1 pair 4mm banana plug/binding posts per channel
Power requirement:
100 / 115 / 230Volts AC 700 Watts maximum into 8 Ohms, 45 Watts idle
50 / 60Hz (factory pre-set)
Standard Accessories:
Mains lead 10 Amp IEC type, 1 off
Remote control A5.5, universal, 1 off
Batteries Size LR03 or AAA managanese alkaline type, 2 off
Dimensions:
Unit only 440mm, 17 1/3 inches wide
125mm, 5 inches high inc. feet
400mm, 15 3/4 inches deep inc. terminals
Unit in shipping carton 555mm, 22 inches wide
290mm, 11 1/2 inches high
525mm, 20 3/4 inches deep
Weight:
Unboxed 16.6kg, 36 3/4 lbs
In shipping carton, including all accessories 21.3kg, 46 3/4 lb